Interwood Hop 36/1650 through feed press

The Interwood HOP 36/1650 through feed press is a down stroke machine pressing platen which operates from top to bottom.

It is used for veneering chip board, MDF panels, laminate panels, bathroom panels, security doors and flush doors using heat to cure the adhesive.

The Interwood HOP 36/1650 through feed press automatically feeds the panels in and out of the press. 

Interwood Hop 36/1650 through feed press technical information

Heated Hydraulic veneer press
Presses - Consisting of:
1 New Interwood HOP Through Feed Press Line:

In feed conveyor
Fitted with Teflon coated conveyor, with a capacity of 3600mm x 1650mm, foot operated or automatic operation, free standing and fully guarded.

Main Press

• Working pressure 200 tonnes
• Platen Dimensions 3600 x 1650mm
• Pressure over full platen area 3.36kg/cm2
• Number of cylinders 8
• Diameter of cylinders 125mm
• Rated oil pressure 22mpa
• Feed speed 15mt/min
• Heating power 45Kw
• Installed power 10Kw
• Facility to shut off last two cylinders
• Max.  opening (adjustable) 250mm
• Top belt shaker unit
• Rubber membrane of suitable shore hardness to be fitted beneath mylar film on top platen.
• High valve electronic thermostat and probe units to be fitted to ensure constant temperature control within 2° with digital readout.

• 3600 x 1650mm to have free running rollers approx.  50mm at 130mm centres.