Machine Structure:
Machine base manufactured from heavy duty fabricated steel to guarantee stability and accuracy for operating units.

Body Frame is laser cut for strength and accuracy.

Panel Feeding System:
Main control touch screen HMI ( Human machine interface) user friendly

The guide ways for the track pads consist of one steel bar ground and hardened and one precision machined flat bar.  This maintains accuracy of panel feeding.

Track Mechanism consists of a chain drive with sprockets at either end of the machine.

Main track is fitted with rubber track pads.

Top pressure consists of heavy-duty beam being raised and lowered by two steel columns.  These are fitted with rubber wheels.

Top Beam fitted with power rise and fall with digital read out

When the top pressure is adjusted it automatically raises the trimming stations.

Pre-Milling unit.
Counter rotating milling units allowing for clean edge prior to edge banding.

Two diamond covered cutter blocks that are durable for most substrates.

Strengthen area to eliminate vibration.

Adjustment made simple with mechanical digital; read out

Motor power 2 x.75KW

Glue Pot, Edge Feeding and Pressure Zone
The glue pot consists of a quick melting system and a heated application roller.

Control via a digital thermostat.

Edge feeding for materials 0.4 to 3mm

Guillotine for edging up to 3mm.

Pressure roller system consisting of 4 rollers.

First roller driven, rollers 2, 3, 4 are free running with independent pressure adjustment.

Machine if fitted with an encoder for accurate track speeds

Snipping Unit
Two independent high frequency motors are fitted to trim the front and rear edges.

Trimmers are positioned using a precision linear slide way system enabling accurate trimming of panel.

Simple manual adjustment for accurate trimming.

Supplied complete with saw blade.

Motor4 power 2 x 0.37 KW

12000 RPM

Fine Trimming Unit
Two independent high frequency motors are fitted to trim top and bottom of panel.

Manual tilt movement between 0 and 10° for angled trimming of edging.

Independent tracing wheels for accurate machining of edging.

Fully adjustable tracing wheels for accurate machining of edging.

Automatic thickness adjustment via link to main beam.

Supplied complete with straight or radius cutters.

Motor power 2 x 0.75KW

RPM 1800

Corner Rounding
Double stage rounding unit

Linier shafts for speed and accuracy

Simple adjustment

Corner rounding on panel thickness up to 60mm

Motor power

Edge Scraping
Unit complete with two cutting knives.

Mechanical digital readouts for fine adjustment.

Mounted on a heavy-duty framework to insure accuracy.

Chrome plated positioning pads for accurate adjustment of cutting knives.

Knives are 3mm radius for PVC and ABS edges.

Brushing Unit
Fitted with two independent motors.

Two cloth polishing mops.

Manual adjustment for raising and lowering the unit.

Technical Specification:
Panel Thickness 10-60mm
Panel Width Min 60mm
Panel Length Min 175mm (pvc)
Edge Width 15-65mm
Edge Thickness 0.4 to 3mm
Feed Speed 0 - 23 m/min (20 m/min for corner rounding)
Maximum working height for corner rounding 50mm
Frequency Converter 200Hz
Installed Power 13.05
Pneumatic Power 0.7MPa
Net weight 1450kg
Overall dimensions 5900mm L x 760mm W x 1600mm H

Lease or Finance options are available on request.